Save $771.00
Hyundai DHY22KSE 22kVA Diesel Generator – Ready for Blackouts! If your power supply is more unreliable than a mate who says “I’ll be there in 5 min...
View full detailsWhen the grid drops, a proper home backup generator keeps the fridge cold, the lights on and the essentials running until power comes back.
Read moreSize the set to what you actually need to keep alive, not the whole switchboard. Essentials (fridge, lights, modem, a few points) usually sit around 6–8kVA. Whole-home or farm shed loads with pumps and more circuits climb toward 10–18kVA+. Petrol and inverter units cover shorter outages; diesel is the usual pick when the blackout can stretch. For a deeper backup walkthrough, see our guide to diesel generators for home backup.
Portable long-range diesels are a solid starting point for Aussie homes that want something you can roll out when the storm hits. The DHY6000SE (6.5kVA) covers essentials without going oversized. Step up to the DHY8700SE-LRS (8kVA) or DHY10000SE-LRS (10kVA) when you want more headroom and a tank that lasts through a longer outage. Quiet canopy diesels suit a set that lives beside the house; open petrol frames suit shorter jobs where fuel is easy.
Most suburban houses run single-phase. A farm shed, workshop motors or a three-phase board needs a 3 phase generator matched to that plant. The DHY11KSE-3 (11kVA) suits lighter three-phase shed loads; the DHY22KSE-3 (22kVA) steps up when the motor list gets serious. Do not buy three-phase for a normal single-phase house just because the number looks bigger.
List every load that must stay on together, then allow surge for fridges, pumps and compressors. Essentials often land around 6–8kVA. Whole-home with more circuits, heating or a bore pump usually wants 10–18kVA or a canopy set sized to the board. Undersizing is the usual disappointment.
Diesel favours long blackouts and fuel economy under a steady load. Petrol is fine for shorter outages when you want easy servo fuel. A portable inverter can cover a fridge and lights quietly, but it is not a fixed whole-home standby. Match fuel to how long your outages actually run.
Electric start (and remote start on some diesels) matters when you fire the set in the dark. A quiet canopy is kinder on neighbours and on hearing. A changeover or transfer switch, fitted by a licensed electrician, is the safe way to feed selected circuits. Make sure you never backfeed a wall socket!
Shop generators for home backup, then match output and fuel to the loads that must stay on. Unsure between a portable diesel and a canopy set? We’ll help you pick. Browse diesel generators or portable inverter generators if the job sits outside fixed backup.
Add up what has to stay on together, then allow for motor surge. Essentials (fridge, lights, a few points) often land around 6–8kVA. Whole-home or farm loads with pumps usually climb toward 10–18kVA+. Size to what you’ll actually keep running, not the whole switchboard.
Diesel is usually the go for longer blackouts and steadier fuel use under load. Petrol is fine for shorter outages when you want easy servo fuel. Match tank size and kVA to how long your outages actually run. Our diesel home backup guide covers it in more detail.
A lot of the canopy and open-frame backup sets use AVR (or electronic regulation) to keep voltage steadier as the load changes, handy for lights and tools. Check the product page, because not every unit is the same. Inverters regulate differently and aren’t “classic AVR.” AVR isn’t a substitute for a proper battery charger if you’re topping up lithium.
Yep! Use the generator to run a proper AC battery charger or inverter-charger when the sun’s thin or you need a top-up overnight. Match the charger to the outlets and continuous watts (leave a bit of headroom for surge), and never feed generator AC straight into the battery terminals. Cleaner portable power sits in portable inverter generators; for the wider bank and charger setup see off-grid power systems.
Usually no. A standard single-phase house wants a single-phase backup set. Three-phase is for three-phase boards, workshop motors or farm plant, buying it for a normal house doesn’t give you more useful power on single-phase circuits.
A changeover or transfer switch, fitted by a licensed electrician, is the safe way to feed selected circuits. Never backfeed a wall socket. You don’t always need the whole house, plenty of setups only cover the essentials board.