Vortex Viper PST Gen II 5-25x50 FFP Hunting Scope
This is an estimate only. Actual delivery times can vary with stock availability, courier delays, weather, public holidays and your location.
Vortex PST Gen II 5-25x50: Reach Out and Stay Honest
At long range the rifle is rarely the problem. It's whether you can see what you're shooting at, and whether the marks in your scope still mean what they meant at a different magnification. The Vortex PST Gen II 5-25x50 FFP deals with both. Twenty-five power on a 50mm objective gives you the detail to read mirage and call your own shots, and the first focal plane EBR-7C reticle keeps its subtensions honest at every power — so a hold taken at 12x is the same hold at 25x, with no conversion and no dialling to a magic number first. Tactical turrets with an RZR zero stop let you dial elevation for the shot and spin back to zero by feel. It's the serious end of the Viper line at 884 grams and 40.6 cm.
Pick your turret units below and add it to your cart.
MOA or MRAD? Both options below are the same scope with the same glass and the same EBR-7C reticle pattern — only the units differ. Note the MOA version also carries more adjustment travel, which matters if you shoot to extended distance. Full explanation in the FAQs.
Free shipping Australia-wide. Backed by the Australian Vortex VIP unlimited lifetime warranty.
Vortex PST Gen II 5-25x50: What You Get
- Your holds stay true at any magnification — the first focal plane EBR-7C reticle scales with the image so subtensions are constant, which means you can range and hold at 10x or 25x without converting anything or winding to a set power first.
- You can see enough to call your own shots — 25x on a 50mm objective resolves mirage, trace and impacts at distance, so you're correcting off what actually happened rather than guessing and firing again.
- Dialling up and back down is a non-event — tactical turrets with the RZR zero stop let you come up for a long shot and return to zero by feel alone, removing the classic error of finishing a full rotation out without realising.
- The reticle works when the light doesn't — glass-etched and illuminated across ten intensity levels with an off position between each, so you can dial in just enough glow for last light without washing out the target or hunting through settings.
- It survives being used properly — a single-piece 30mm tube machined from a solid block of aircraft-grade aluminium, argon purged and O-ring sealed, shockproof under recoil, hard anodised for low glare and ArmorTek coated on the exterior glass.
Vortex PST Gen II 5-25x50 Specifications
| Magnification | 5–25x |
| Objective Lens Diameter | 50 mm |
| Field of View | 24.1–4.8 ft / 100 yds |
| Eye Relief | 3.4 in |
| Tube Size | 30 mm |
| Reticle | EBR-7C, first focal plane, glass-etched, illuminated (10 levels with off positions between) |
| Turret Style | Tactical, RZR zero stop |
| Parallax Setting | 25 yards to infinity |
| Length | 40.6 cm / 16 in |
| Weight | 884 g / 31.2 oz |
| Construction | Single-piece aircraft-grade aluminium, waterproof, fogproof (argon purged), shockproof, hard anodised, ArmorTek |
| Warranty | Australian Vortex VIP unlimited lifetime warranty |
Where the two options differ
| MOA | MRAD | |
| Click Value | 1/4 MOA | 0.1 MRAD |
| Travel per Rotation | 25 MOA | 10 MRAD |
| Max Elevation | 70 MOA (approx. 20.4 MRAD) | 20 MRAD |
| Max Windage | 35 MOA (approx. 10.2 MRAD) | 10 MRAD |
| Reticle | EBR-7C (MOA) | EBR-7C (MRAD) |
| SKU | VOPST5256 | VOPST5259 |
Vortex PST Gen II 5-25x50 FFP FAQs
MOA or MRAD — which should I choose?
Start with whichever you already think in, and match your ballistic app, your data book and whoever spots for you. Mixing units is how good shooters miss. Beyond that, there's one practical difference here worth knowing: the MOA version has meaningfully more adjustment travel, roughly 20.4 MRAD equivalent of elevation against the MRAD version's 20, and about 10.2 against 10 in windage. Marginal for most shooting, but if you're pushing to extended range on a canted base, the MOA turrets give you a little more room before you run out.
What is the EBR-7C reticle and will I find it cluttered?
It's a hashmarked first focal plane tree reticle — a floating centre with fine windage and elevation marks below for holding wind and drop without touching the turrets. The lower half carries the detail while the upper half stays clean, so the view isn't busy at low power. Because it's first focal plane, every mark holds its value across the full 5–25x range.
What do I need to mount it, and how do I set it up?
It's a 30mm tube, so you need 30mm rings or a 30mm one-piece mount — the 1 inch cantilever mount we stock will not fit this scope. At 40.6 cm long with a 50mm objective it also needs enough ring height to clear the barrel, so check clearance before you commit. Set eye relief by shouldering the rifle until the picture is full with no dark ring, level the reticle, then torque the ring caps gradually in a criss-cross pattern to the manual's values. Zero it, then set the RZR zero stop. Confirm the rifle is unloaded before you start.
What does the VIP warranty actually cover?
Vortex will repair or replace the scope if it's damaged or defective, no matter how it happened or whose fault it was. No warranty card, no receipt to keep, and it transfers if you sell it on. It doesn't cover loss, theft, misuse or deliberate damage, and return postage to the service centre is on you.