Amptron Mounting Tray For 12V 400Ah, 24V 200Ah, 36V And 48V BluEdge Batteries

The Amptron Type E Tray - Built For The Heavy End Of The Range

A 12V 400Ah bank or a 36V or 48V system is a serious investment, and a heavy one. Let it shift about and every corrugation drives that weight through the terminals and cables, which is how a big battery wears out years before it should.

This tray is built for five Amptron BluEdge batteries: the 12V 400Ah, 24V 200Ah, 36V 100Ah, 36V 150Ah and 48V 100Ah. Powder-coated aluminium, a thick silicone base pad, and two heavy-duty locking straps over the top.

Put a proper mount under a proper battery. Add one to your cart today.

Why The Amptron Mounting Tray May Be Right For You:

• Hold a big battery the way it needs holding with a tray sized for Amptron's high-capacity BluEdge range, so the battery sits snug instead of sliding about on rough ground.
• Protect your terminals and cables thanks to the thick silicone base pad, which absorbs vibration and impact rather than passing it into the connections.
• Strap it down for good using two heavy-duty flexible locking straps, which hold far better than a bungee or something improvised.
• Carry the extra weight with confidence on a 4.45kg powder-coated aluminium tray made for larger, heavier batteries.
• Leave it where it cops the weather because the powder coating resists corrosion and dust, so it still looks right after a few seasons out bush.
• Cover five batteries with one tray since it suits the 12V 400Ah, 24V 200Ah, 36V 100Ah, 36V 150Ah and 48V 100Ah BluEdge, which helps if you move to a higher-voltage system later.

Which Batteries It Fits:

• AT-LFP-12-400-BTC-DV10, Amptron 12V 400Ah / 300A LiFePO4 ABS BluEdge
• AT-LFP-24-200-BTC-BV10, Amptron 24V 200Ah / 200A LiFePO4 ABS BluEdge
• AT-LFP-36-100-BTC-AV10, Amptron 36V 100Ah / 100A LiFePO4 ABS BluEdge
• AT-LFP-36-150-BTC-BV10, Amptron 36V 150Ah / 180A LiFePO4 ABS BluEdge
• AT-LFP-48-100-BTC-AV10, Amptron 48V 100Ah / 100A LiFePO4 ABS BluEdge

Where It Suits:

• Under rear seats or in the tray back of 4WDs
• Boats
• Dual cab and single cab ute trays
• Caravans and motorhomes
• Camper trailers
• Off-grid and solar power setups
• Commercial and fleet vehicles
• Any job needing a secure mount for a high-capacity battery

What's In The Box:

• 1 x Amptron aluminium mounting tray
• 2 x flexible locking straps
• 1 x silicone shock-absorbing base pad

Amptron Mounting Tray Tech Specs

Amptron Mounting Tray FAQs

1. Which batteries does this tray fit?
Five Amptron BluEdge batteries: the 12V 400Ah (AT-LFP-12-400-BTC-DV10), 24V 200Ah (AT-LFP-24-200-BTC-BV10), 36V 100Ah (AT-LFP-36-100-BTC-AV10), 36V 150Ah (AT-LFP-36-150-BTC-BV10) and 48V 100Ah (AT-LFP-48-100-BTC-AV10). Tray dimensions are 522 x 274 x 150mm, so another battery may fit if it sits inside those measurements, but measure yours first. Ring us on 1300 902 361 if you want it checked.

2. Will it fit a 12V 200Ah battery?
No, it's too big. The 12V 200Ah batteries and the 24V 100Ah use the Type C tray at 370 x 200 x 189mm, and the 200Ah Slimline BluEdge has its own Type D tray. A smaller battery rattling about in an oversized tray is no better off than one with no tray at all.

3. Do I need an auto electrician to fit it?
Not for the tray, that's a self-installation job. Wiring the battery is another matter, and at 24V, 36V or 48V that's even more reason to leave the electrical side to someone qualified.

4. How can one tray suit 12V, 24V, 36V and 48V batteries?
Because the tray holds the battery case, not the voltage. Amptron built it as an exact fit across these five BluEdge models, so if you start on the 12V 400Ah and move to 48V later, the tray can stay where it is.