Enerdrive | Dometic eSYS-H Off-Grid Power System

Enerdrive eSYS-H Off-Grid System – Reliable Power, Wherever You Pull Up!

If you’re sick of your caravan or van turning into a glorified battery graveyard the minute the sun ducks behind the hills, the Enerdrive Dometic eSYS-H Off-Grid Power System is your new best mate.

This pre-wired power setup sorts out all the headaches of piecing together chargers, solar inputs and inverters yourself, no more spaghetti wiring or “which wire goes where?” moments. 

Whether you’re parked up at a remote camp with a fridge running flat, lights dimming or the missus threatening mutiny over a cold cuppa, this system keeps your juice flowing on solar, mains or while you’re driving. Easy to install and built tough for Aussie conditions, it means you get on with the adventure, not the power drama. 

Ready to keep the lights on and the beers cold? Grab yours and start your worry-free off-grid trip today!

Add one to your cart and get the whole kit sorted.

Why The Enerdrive Dometic eSYS-H May be Right For You:

• Enjoy reliable, no-fuss power wherever you pull up thanks to the fully integrated eSYS-H all-in-one power system, so you can run your fridge, lights and appliances without stressing about flattening your batteries.

• Save time and avoid wiring headaches with the pre-wired and pre-configured design, meaning you spend less time scratching your head over cables and more time kicking back with a cold one.

• Keep your batteries charged from multiple sources without lifting a finger through its combined solar, DC-DC and AC charging capability, so you’re covered whether you’re driving, plugged in at a park, or camped up off-grid.

• Run your 240V appliances just like you would at home with the powerful integrated inverter, giving you the freedom to use your coffee machine, induction cooktop or tools even when you’re miles from civilisation.

• Get peace of mind knowing it’s built tough for Aussie conditions with high-quality Enerdrive and Dometic components designed for caravans and off-road touring, so your power system keeps performing even when the tracks get rough.

Enerdrive Dometic eSYS-H Package Contents:

• Enerdrive eSYS-H Integrated Power System (pre-wired in enclosure)

• 2000W Pure Sine Wave Inverter

• AC Battery Charger

• DC-DC Charger

• MPPT Solar Charge Controller

• Remote Display / Control Panel

• Pre-installed wiring and protection devices

• Installation manual and documentation

eSYS-H Off Grid Power System Wiring Diagram:

eSYS-H Off Grid Power System Tech Specs

Enerdrive Dometic eSYS-H Off-Grid Power System FAQs

1. What's included in the eSYS-H?
A pre-wired enclosure containing a 2000W pure sine wave inverter, an AC battery charger, a DC-DC charger, an MPPT solar charge controller, a remote display and control panel, pre-installed wiring and protection devices, and the installation documentation.

2. How much solar and vehicle charging does it handle?
Vehicle charging from a 12V or 24V alternator at up to 40 to 50A, and solar up to around 45V open circuit and approximately 800W, though solar capacity varies by variant. Mains charging is included.

3. What size is the board?
Approximately 1195mm wide by 380mm high by 111mm deep, so it needs a decent flat run of wall. Check your available space before ordering.

4. Does it need professional installation?
It arrives pre-wired on its board or in its enclosure, which removes most of the work and the guesswork. You still need the system mounted and connected to your batteries, vehicle and any solar, and that's high-current wiring. We'd recommend a qualified auto electrician unless you genuinely know what you're doing. Give us a ring on 1300 902 361 and we can help arrange it.