DJI Matrice 400 Industrial Drone
Why Shop With Outback SafeTrack
-
Free ShippingEnjoy free shipping on this product!
-
Exclusive DiscountsCall us on 1300 902 361 for an exclusive discount.
-
30-Day ReturnsChanged your mind? Send it back with no fuss.
-
Fast DeliveryGet this product in 2–10 business days or claim $100 store credit.
-
Real Aussie SupportCall us Mon–Sat, 8am–9pm AEST. We’re here to help.
*Delivery windows may vary by location and carrier. $100 store credit applies if delivery exceeds 10 business days after dispatch.
DJI Matrice 400 Aerial Survey Drone
Why The Matrice 400 Drone May Be Right For You:
- Cover more ground without stopping every few minutes thanks to up to 59 minutes of flight time, so you can complete large surveying, mapping and inspection jobs in fewer flights and save valuable time on site.
- Take on demanding industrial jobs with confidence using a massive 6 kg payload capacity and support for multiple gimbal configurations, allowing you to carry the right sensors and equipment for almost any mission without needing another drone.
- Fly safer around power lines, towers and tricky obstacles with integrated rotating LiDAR, mmWave radar and advanced obstacle sensing, helping reduce risks while giving you peace of mind on every flight.
- Stay connected even when the job takes you well off the beaten track thanks to DJI O4 Enterprise Enhanced and Airborne Relay Video Transmission, ensuring reliable control and clear video for smoother, more efficient operations.
- Get accurate results with less mucking about using smart automation, AI-powered detection, visible and thermal imaging support, and advanced flight features, so you can complete inspections, emergency response and mapping missions faster and with greater confidence.

Matrice 400 Drone Package Contents:
- 1 × DJI Matrice 400 Aircraft
- 1 × DJI TB100 Intelligent Flight Battery
- 1 × DJI BS100 Intelligent Battery Station
- 1 × DJI RC Plus 2 Enterprise Enhanced Remote Controller
- 1 × DJI RC Plus 2 sub2G SDR Module
- 1 × DJI RC Plus 2 Strap & Bracket Kit
- 1 × DJI Matrice 400 Carrying Case
- 2 × Propeller Pairs (4 Propellers Total)
- 6 × Propeller Washers & Screws
- 2 × Landing Gear
- 1 × WB37 Intelligent Battery (for the remote controller)
- 1 × USB-C to USB-C Data Cable
- 1 × Power Cable
- 1 × Rotating LiDAR Calibration Cover
- 1 × Front Propeller Holder
- 1 × Rear Propeller Holder
- 4 × Gimbal Dampers
- 2 × E-Port V2 Rubber Port Covers
- 4 × Rubber Plug Screws
- 1 × Screw & Tool Set
- 1 × Cleaning Tool Set
DJI Matrice 400 Industrial Drone User Manual:
DJI Matrice 400 Tech Specs
- Aircraft Weight: Approx. 9.74 kg (with battery and propellers)
- Maximum Take-Off Weight: 15.8 kg
- Dimensions (Unfolded): 980 × 760 × 480 mm
- Dimensions (Folded): 490 × 490 × 480 mm
- Maximum Flight Time: Up to 59 minutes
- Maximum Hover Time: Up to 53 minutes
- Maximum Payload Capacity: 6 kg
- Maximum Speed: 25 m/s (90 km/h)
- Maximum Transmission Distance: Up to 40 km (FCC) / 20 km (CE/SRRC/MIC)
- Video Transmission System: DJI O4 Enterprise Enhanced with Airborne Relay Video Transmission
- Obstacle Sensing: Omnidirectional binocular vision, rotating LiDAR, upper LiDAR, downward 3D infrared sensor, and six-direction mmWave radar
- FPV Camera: 1080p, 30 fps, Starlight Night Vision
- Ingress Protection Rating: IP55
- Operating Temperature: -20°C to 50°C
- Supported Payload Configurations: Single downward gimbal, dual downward gimbals, or three-gimbal configuration
- Battery: DJI TB100 Intelligent Flight Battery (20,254 mAh, 977 Wh)
- Compatible Software: DJI Pilot 2, DJI FlightHub 2, DJI Terra, DJI Modify, DJI SDKs
